Storage
313381L 27
Storage
Short Term Storage
(up to 2 days)
1. Relieve pressure, page 16.
2. Leave suction tube and prime tube in paint pail.
3. Cover paint pail and hoses tightly with plastic wrap.
4.
a. Engage trigger lock.
b. Leave gun attached to hose.
c. If you have not already cleaned them, remove
tip and guard from gun and clean with water or
flushing solvent. A soft brush can be used to
loosen and remove dried on material if needed.
d. Wipe paint off outside of gun using a soft cloth
moistened with water or flushing solvent.
Long Term Storage
(more than 2 days)
1. Place suction tube in Pump Armor storage fluid bot-
tle and prime tube in waste pail.
2. Turn Prime/Spray valve to PRIME.
3. Turn power switch ON.
• Always circulate Pump Armor storage fluid
through system after cleaning. Water left in
sprayer will corrode and damage pump.
• Follow Shutdown and Cleaning, page 23, or
Power Flush Cleaning, page 25.
ti12941a
ti13961a
Project Painter
150/170
To Next Page
Loading...
