Graham Field Basic American MATRIX Series - Bed Setup and Operation Instructions; Unpacking the Bed (Matrix 4000 Series Shown)

• Ensure all parts / components are included.
• Check all bed components for obvious damage.
• Inspect the Power Cord for cuts or damage.
• Ensure all actuator / motor cables are routed
and connected properly to the control box.
BED SETUP AND OPERATION INSTRUCTIONS
UNPACKING THE BED (MATRIX 4000 SERIES SHOWN)
DISCARD
1) Foam Block (4)
2) Honeycomb Block (8)
3) Shipping Board (1)
4) Cable Tie (3) - Cut and Discard
KEEP
5) Panel Mount Kit
6) Mattress Retainer
7) Pendant Holster
8) Wireform Wallsaver
NOTE:
END OF POWER
CORD IS COILED
FOR SHIPPING
AND TIED, WITH
CABLE TIE, TO GRID
WIRE WITH HAND
CONTROL PENDANT,
PENDANT CABLE AND
HOLSTER.
GF Health Products, Inc. - www.grahameld.com Matrix Series Instructions for Use 999.0908-190C
MATRIX SERIES
10