RECOMMENDED CLEANING AND DISINFECTION
WARNING: Unplug the bed from the electrical outlet before servicing or cleaning.
Do not steam clean or pressure wash any part of bed.
Do not use corrosive or powdered cleansers to clean any part of bed.
Do not immerse or soak any part of bed.
CLEANING
Cleaning/Disinfecting the Metal Components and Mechanical Accessories
All metal parts of the bed have been covered with a baked-on epoxy coating.
• To remove dust from the frame: Carefully raise the head and foot sections of the bed and
wipe the frame with a clean, soft cloth. If disinfection is required, wipe with a clean, soft cloth
dampened with a hospital grade disinfectant diluted per manufacturer’s directions.
• To clean coated metal parts: Wipe with a clean, soft cloth dampened with mild detergent and
warm water. If disinfection is required, wipe with a clean, soft cloth dampened with a hospital
grade disinfectant diluted per manufacturer’s directions.
• To clean the mattress deck: Remove the mattress, then wipe mattress deck with a clean,
soft cloth dampened with mild detergent and warm water. Allow to air dry before replacing
mattress. If disinfection is required, wipe with a clean, soft cloth dampened with a hospital
grade disinfectant diluted per manufacturer’s directions.
Cleaning the Hand Control Pendant and Electrical Components
Wipe the hand control pendant and electrical components’ external surface only with a clean, soft
cloth dampened with mild detergent and warm water. If disinfection is required, wipe with a clean,
soft cloth dampened with a hospital grade disinfectant diluted per manufacturer’s directions.
Air dry.
Cleaning the Mattress
Wipe with a damp cloth to remove any foreign material, then wipe with a clean, soft cloth
dampened with mild detergent and warm water. If disinfection is required, wipe with a clean, soft
cloth dampened with a hospital grade disinfectant diluted per manufacturer’s directions. Air
dr y.
GF Health Products, Inc. - www.grahameld.com Matrix Series Instructions for Use 999.0908-190C
7
MATRIX SERIES
To Next Page
Loading...
Need help?
General
