When receiving the product, check the packaging material for damage.
If any damage occurs at the packaging material, it should be considered if the product might have been
damaged too. If the damage is substantial, please contact your dealer.
The transport pallet can be removed by loosening the screws that fasten the pallet to the product (see the
below illustration).
This task requires at least 2 persons. The heaviest part of the product is at the top. Be
aware of this, when removing the transport pallet.
Because of the heavy weight of the product, the floor might be damaged or scratched
when moving the product.
Correct set up gives the most effective operation.
The product should be placed in a dry and adequately ventilated room.
To ensure efficient operation, it may not be placed in direct sunlight or against heat-
emitting surfaces. The product is designed to operate in an ambient temperature
between +16C and +40°C.
Avoid placement of the product in a chlorine/acid-containing environment (swimming
bath etc.) due to risk of corrosion.
The product and parts of the interior is equipped with a protecting film, which should be
removed before use.
Clean the product with a mild soap solution before use.
To Next Page
Loading...
