Gram GX Series User Manual

11
to choose the desired range: 0.5d,1d,1.5d,2d,2.5d,3d,3.5d,4d,4.5d,5d. (“d” is
the division value, when n=3000). Press the key to confirm.
Filter setting
Press the key for 3 seconds until the message “range” is displayed,
press again the key until seeing the message “FILtX” (FILt1 for a stable
environment, FILt2 for an unstable environment and FILt3 for very unstable
environment).
Press the key to access to three available modes, press the keys to
select the desired mode and confirm pressing key .
Select weighing unit
Press the key for 3 seconds until the message “range” is displayed,
press again the key until the display shows “Unit5” , press the key
to access to the parameter, use the key to choose the desired weighing
unit and confirm by pressing
Available weighing unit: kg, g, Lb.lb, Lb.oz, pcs. (counting-pieces)
Limits setup
Press the key for 3 seconds until the display shows the message “range”,
press the key to enter. The display will show “off”, press the key to select
the mode “on” and then press . Now the indicator “under” will light on. Press
the key to change the first digit and use to move to the next digit. Press
to confirm the introduced value.
Now, the indicator “over” will light on. Press the key to change the first digit
and use to move to the next digit. Press to confirm the introduced value.

Gram GX Series Specifications

General

Brand	Gram
Model	GX Series
Category	Scales
Language	English