Material No. 1 447 263
1 Inspection and repair work may only be performed by specially trained personnel.
2 All of the work steps described must only be carried out in compliance with all
directives and requirements of the responsible authorities and of the health,
accident and environmental protection regulations.
3 Special instructions in the repair manual are highlighted as follows:
CAUTION…
indicates a possible danger to persons and how to avoid it.
ATTENTION ...
indicates possible material damage or destruction and how to avoid it.
Note: …
indicates an additional explanation for understanding the work to be performed.
Installation instruction: ...
indicates an additional explanation for understanding the installation work to be
performed.
4 The following steps must be carried out before starting any repair work:
Disconnect the seat from the power supply.
In the lower position, move the seat until it meets the end stops.
5 When handling oils, greases and other chemical substances, the product safety
requirements must be observed.
To Next Page
Loading...
