70
WASHING MACHINE Series GWH / GWM / GWN
MAINTENANCE
REPLACING FUSES
Required IPD Operator qualification Required equipment
ENABLED TECHNICIAN
WARNING!
Make sure the appliance is not connected to the power supply and cannot be accidentally turned on.
The fuse precise values can be found close to the fuse casings and in the circuit diagram supplied with the appliance.
If a fuse blows, it can be replaced with a fuse with the same value, but never with a fuse having a higher value.
If a fuse blows again, do not replace it, but find the cause of the fault using the wiring diagram attached.
In case of need, please contact the Manufacturer.
To Next Page
Loading...
