Grandstream Networks GDS3710 - Alarm Phone List; Alarm Events Config; Figure 17: Alarm Phone List; Table 2: Alarm Phone List

P a g e | 19
GDS3710 Input/output Connection Guide
Alarm Phone List
This page allows user to configure the Alarm Phone List, which is phone numbers or extensions list that the
GDS3710 will call out when event trigged (e.g.: doorbell pressed).
Figure 17: Alarm Phone List
Table 2: Alarm Phone List
Add
Add new phone number to the alarm list.
Delete
Delete a number from the phone alarm list.
Once the event is triggered (Motion Detection, Door Bell Pressed…) the GDS3710 will call the first number,
once time out is reached and no answer is returned from the first number, the GDS3710 will try the next
number on the list and so on. Once the remote phone answers the call an alarm will be played to notify
users that an event is triggered.
Alarm Events Config
This page allows users to configure what Events the GDS3710 can take to trigger the programmed action
within the predefined schedule.