Grandstream Networks GDS3712 User Manual

Select
Schedule 1
Selects the predefined Alarm Schedule.
Select
Alarm
Action
Profile 1
Selects the predefined Alarm Action for Profile 1.
Digit Input
2
Selects the Input method (alarm Input or Door Open).
Default disabled.
Digital Input Port operates in 2 Modes:
1. Alarm Input: Connect various of sensor to trigger alarm.
2. Open door: Connect a switch to open door from inside.
If Digital Input port is connected to a switch, it will not work during the time of power outage, device
booting or firmware upgrading.
Digit Input
2 Status
If set to Normal Open: Configured alarm will be triggered when Digital Input Status switch from Close
to Open.
If set to Normal Close: Configured alarm will be triggered when Digital Input Status switch from Open
to Close.
By default, Input Digit 2 Status is “Disabled”.
Select
Schedule 2
Selects the predefined Alarm Schedule.
Select
Alarm
Action
Profile 2
Selects the predefined Alarm Action for Profile 2.
Alarm
Output
Duration(s)
Select the duration of the alarm output: 5/10/15/20/25/30 seconds.
This option is hidden when ALMOUT1 Feature is set to Open Door.
Table 19: Input Digit
Alarm Output
Alarm Output Duration(s) specifies how long the alarm output will take effect. The available values are: 5,10,15,20,25 and 30
seconds.
Silently Alarm Mode
If Silently Alarm Mode is enabled, GDS370x will disable alarm sound and background light for specified alarms types (Digital
Input) when they are triggered.
Note
This option affects only alarm sound/light, other actions will still be applied.

Grandstream Networks GDS3712 Specifications

General

Brand	Grandstream Networks
Model	GDS3712
Category	Intercom System
Language	English