Alarm Phone 1-
10
Add the phone numbers to be called into the alarm list.
Table 26: Alarm Phone List
Once the event is triggered (Door Bell Pressed…), the GDS3705 will call the first number, once time out is reached and no
answer is returned from the first number, the GDS3705 will try the next number on the list and so on. Once the remote phone
answers the call, an alarm will be played to notify users that an event is triggered.
Email Settings
This page contains Email Settings.
Email Settings
This page allows users to configure email client to send out an email when the alarm is triggered.
Figure 76: Email Settings – SMTP Page
SMTP Server Configures the SMTP Email Server IP or Domain Name.
SMTP Server Port Specifies the Port number used by server to send email.
From E-mail address Specifies the email address of alarm email sending from, usually client email ID.
Sender Email ID Specifies sender’s User ID or account ID in the email system used.
Sender Email Password Specifies sender’s password of the email account.
Alarm-To Email Address 1 Specifies the 1 email address to receive the alarm email.
Alarm-To Email Address 2 Specifies the 2 email address to receive the alarm email.
SSL Check if the SMTP email server requires SSL.
Table 27: Email Settings – SMTP
st
nd
Notes
Click “Save” to save the email configuration information.
To Next Page
Loading...
Need help?
General
