o Syslog
Configures Syslog level, Transport protocol and Syslog Server’s address.
o Security
Enables disables Web and SSH access.
o Alternative Firmware
Press softkey to switch between the dual firmware versions loaded to
the phone. The phone will reboot with the chosen version.
o Factory Reset:
Perform Factory reset to the phone. All device configuration and user data
will be lost after factory reset.
• Ethernet Settings
o Internet Protocol
Selects Prefer IPv4 / Prefer IPv6 / IPv4 only or IPv6 only. The default setting
is “IPv4 only”.
o IPv4 Setting
Selects IP mode (DHCP/Static IP/PPPoE); Configures PPPoE account ID
and password; Configures static IP address, Netmask, Gateway, Preferred
DNS server.
o IPv6 Setting
Selects IP mode (DHCP/Static IP); Configures static IP address, IPv6 Prefix
(64 bits), IPv6 Preferred DNS server.
• Wi-Fi Settings (GRP2602W only)
o Wi-Fi
Enables/disables Wi-Fi;
o Wi-Fi Band
Choose Wi-Fi band (2G , 5G or 2G&5G).
o Wi-Fi Network
Scans and displays available Wi-Fi networks.
• Instant Messages
Displays received instant messages
• Voicemail
Displays voicemail message information in the following format: Normal/Urgent
To Next Page
Loading...
Need help?
General
