GRP260x Administration Guide
Version 1.0.1.18
Configures extra attribute’s value reserved for specific attributes for a given
notification in the future.
Maintenance → Voice Monitoring
VQ RTCP-XR Session
Report
When enabled, phone will send a session quality report to the central report
collector at the end of each call.
VQ RTCP-XR Interval
Report
When enabled, phone will send an interval quality report to the central report
collector periodically throughout a call.
VQ RTCP-XR Interval
Report Period
Configure the interval (in seconds) of phone sending an interval quality report
to the central report collector periodically throughout a call.
Warning Threshold for
Moslq
Configure the threshold value of listening MOS score (MOS-LQ) multiplied
by 10. The threshold value of MOS-LQ causes the phone to send a warning
alert quality report to the central report collector.
Critical Threshold for
Moslq
Configure the threshold value of listening MOS score (MOS-LQ) multiplied
by 10. The threshold value of MOS-LQ causes the phone to send a critical
alert quality report to the central report collector.
Warning Threshold for
Delay
Configure the threshold value of one way delay (in milliseconds) that causes
the phone to send a warning alert quality report to the central report collector.
Critical Threshold for
Delay
Configure the threshold value of one way delay (in milliseconds) that causes
the phone to send a critical alert quality report to the central report collector.
Application Page Definitions
Table 15: Application Page Definitions
Application → Web Service
Use Auto Location
Service
To enable or disable auto location services on the phone. (Reboot Required)
Press Add to create a new contact.
Edits the contact parameters.
Press to delete all contacts.