Grandstream Networks GRP2601 Administration Guide

P a g e | 62
GRP260x Administration Guide
Version 1.0.1.18
SNMP Trap Username
Username for SNMPv3 Trap.
Trap Security Level
noAuthUser: Users with security level noAuthnoPriv and context name as
noAuth.
authUser: Users with security level authNoPriv and context name as auth.
privUser: Users with security level authPriv and context name as priv.
Trap Authentication
Protocol
Select the Authentication Protocol: “None” or “MD5” or “SHA”.
Trap Privacy Protocol
Select the Privacy Protocol: “None” or “AES/AES128” or “DES”.
Trap Authentication
Key
Enter the Trap Authentication Key.
Trap Privacy Key
Enter the Trap Privacy Key.
Programmable keys Page Definitions
Table 12: Programmable Keys Page Definitions
Programmable keys → Multi-Purpose Keys (GRP2604 only)
Keys Settings
Mode
• Speed Dial
Select the Account to dial from. And enter the Speed Dial number in the
Value field to be dialed or enter the IP address to set the Direct IP call as
Speed Dial.
• Busy Lamp Field (BLF)
Select the Account to monitor the BLF status. Enter the extension number
in the Value field to be monitored.
• Presence Watcher
This option has to be supported by a presence server and it is tied to the
“Do Not Disturb” status of the phone’s extension.
• Eventlist BLF
This option is similar to the BLF option but in this case the PBX collects the
information from the phones and sends it out in one single notify message.
PBX server has to support this feature.
• Speed Dial via active account

Grandstream Networks GRP2601 Specifications

General

Brand	Grandstream Networks
Model	GRP2601
Category	IP Phone
Language	English