GRP260x Administration Guide
Version 1.0.1.18
Shows the status of the core dump and the core dump files generated if any.
It also gives the ability to generate GUI/Phone core dump files manually.
OpenVPN® Support: displaying if the phone supports OpenVPN®.
Account Page Definitions
Table 9: Account Page Definitions
Account x → General Settings
This field indicates whether the account is active.
The default setting is “No”.
The name associated with each account to be displayed on the LCD.
The URL or IP address, and port of the SIP server.
This is provided by your VoIP service provider (ITSP).
The URL or IP address, and port of the SIP server. When configured, phone
will register to both Primary and Secondary SIP Server. If Primary SIP Server
is not reachable then the phone will use Secondary SIP Server for phone
services (including making/receiving calls).
User account information provided by your VoIP service provider (ITSP). It
is usually in the form of digits like phone number or actually a phone number.
SIP service subscriber’s Authenticate ID used for authentication.
It can be identical to or different from the SIP User ID.
SIP Authentication
Password
The account password required for the phone to authenticate with the ITSP
(SIP) server before the account can be registered.
After it is saved, this will appear as hidden for security purpose.
The SIP server subscriber’s name (optional) that will be used for Caller ID
display.
If the phone has an assigned PSTN telephone number, this field should be
set to "User=Phone". Then a "User=Phone" parameter will be attached to
the Request-Line and "TO" header in the SIP request to indicate the E.164
number. If set to "Enable", "Tel:" will be used instead of "SIP:" in the SIP
request.
To Next Page
Loading...
