GRP260x Administration Guide
Version 1.0.1.18
• Memory exception (ERROR level).
Syslog will be filtered based on keywords provided. If you enter multiple
keywords, it should be separated by ‘,’. Please note that no spaces are
allowed.
Configures whether the SIP log will be included in the syslog messages. The
default setting is “No”.
Note: By setting Send SIP Log to Yes, the phone will still send SIP log from
syslog even when Syslog Level set to NONE.
Defines whether the packet capture file contains RTP or not. The default
setting is “No”.
Enter Ping target’s IP address or URL and click on start.
Input target’s IP address or URL and click on start
Maintenance → Outbound Notification
Configures the Action URL to send when phone finishes setup process.
Configures the Action URL to send when phone successfully registers a SIP
account.
Configures the Action URL to send when phone unregisters a SIP account.
Configures the Action URL to send when phone is in off-hook state.
Configures the Action URL to send when phone is in on-hook state.
Configures the Action URL to send when phone receives an incoming call.
Configures the Action URL to send when phone places a call.
Configures the Action URL to send when phone has a missed call.
Configures the Action URL to send when phone establishes a call.
Configures the Action URL to send when phone terminates a call.
Configures the Action URL to send when phone enables DND.
Configures the Action URL to send when phone disables DND.
Configures the Action URL to send when phone enables Call Forward.
Configures the Action URL to send when phone disables call forward.
Configures the Action URL to send when phone performs Blind Transfer.
To Next Page
Loading...
Need help?
General
