Voice Mail
Select Account and enter Voice Mail access number in the Value field.
Call Return
The last answered calls can be dialed out by using Call Return. The
Value field should be left blank. Also, this option is not binding to the
account and the call will be returned based on the account with the last
answered call.
Transfer
Select Account, and enter the number in the Value field to be transferred
(blind transfer) during the call.
Call Park
Select Account, and enter the call park extension in the Value field to
park/pick up the call.
Monitored Call Park
Select account from Account field, and enter the call park extension in
the Value field to park/pick up the call, and also monitor the parked call
via Line Key’s light.
Intercom
Select Account, and enter the extension number in the Value field to do
the intercom.
LDAP Search
This option is to narrow the LDAP search scope. Enter the LDAP search
base in the Description field. It could be the same or different from the
Base in LDAP configuration under Advanced Settings. The Base in
LDAP configuration will be used if the Description field is left blank. Enter
the LDAP Name/Number filter in the Value field.
For example:
If users set MPK 1 as “LDAP Search” for “Account 1”, and set filters:
Description -> ou=video,ou=SZ,dc=grandstream,dc=com
Value -> sn=Li
Since the Base for LDAP server configuration is:
“dc=grandstream,dc=com”, “ou=video,ou=SZ” is added to narrow the
LDAP search scope. “sn=Li” is the example to filter the last name.
Conference
Allow user to set their Multi-Purpose Key to “Conference” mode to trigger
a conference.
To Next Page
Loading...
Need help?
General
