Grandstream Networks GRP261 Series User Manual

Page | 29
GRP261X /GRP2624/GRP2634 User Guide
Version 1.0.5.48
Figure 2: phone Stand and Mounting Slots on the GRP261X/GRP2624/GRP2634
Using the Phone Stand
To install the phone on the table with the phone stand, attach the phone stand to the bottom of the phone
through the phone stand slot. (Upper half, bottom part).
Using the Slots for Wall Mounting
1. Attach the wall mount spacers to the slot for wall mount spacers on the back of the phone.
2. Attach the phone to the wall via the wall mount hole.
3. Pull out the tab from the handset cradle (See figure below).
4. Rotate the tab and plug it back into the slot with the extension up to hold the handset while the
phone is mounted on the wall (See figure below).
Figure 3: Tab on the Handset Cradle
Connecting the GRP261X/GRP2624/GRP2634
To setup the GRP261X/GRP2624/GRP2634, follow the steps below:
1. Connect the handset and main phone case with the phone cord.
2. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of the router)
using the Ethernet cable.

Grandstream Networks GRP261 Series Specifications

General

Brand	Grandstream Networks
Model	GRP261 Series
Category	IP Phone
Language	English