Grandstream Networks GXP1400 User Manual

FIRMWARE VERSION 1.0.4.23 GXP1400/GXP1405 USER MANUAL Page 50 of 60
SIP server is required to make quick IP call. The default setting is "No".
Disable Conference Disables the Conference function. The default setting is "No".
Enable MPK sending DTMF
Enables Multi Purpose Key to send DTMF during the call. The default
setting is "No".
Disable DND Button
If set to "Yes", the DND button will not set the phone to DND. The default
setting is "No".
Disable Transfer Disables the Transfer function. The default setting is "No".
Auto-Attended Transfer
If set to "Yes", the phone will use attended transfer by default. The
default setting is "No".
In-call dial number on pressing
transfer key
Configures the number for the phone
to dial as DTMF during the call
using TRAN button.
Configuration via Keypad Menu
Configures the access control for the users to configure fro
m keypad
Menu. There are three different options:
• Unrestricted. All the options can be accessed in keypad Menu.
• Basic settings only
. The CONFIG option will not display for users
to access in keypad Menu.
• Constraint Mode
. CONFIG, FACTORY FUNCTIONS and
NETWO
RK options will not display for users to access in keypad
menu.
Enable STAR key Keypad
locking
If set to "Yes"
, the keypad can be locked by pressing and holding the
STAR * key for about 4 seconds. A lock icon will show indicating the
keypad is locked. The default setting is "Yes".
Note:
When the keypad is locked, users would need press and hold the STAR
* key for about 4 seconds again and then enter the password to unlock
it.
Password to lock/unlock
Configures the password to lock/unlock the keypad. The password field
allows number with up to 32 characters.
Offhook timeout
If configured, when the phone is on hook, it will go off
hook after the
timeout (in seconds). The default value is 30 seconds.
China Telecom Mode
Enables/Disables China Telecom Mode t
o use China Telecom special
features on the phone.
Do Not Escape # as %23 in
SIP URI
Specifies whether to replace # by %23 or not for some special situations.
The default setting is "No".
Disable Telnet Disables Telnet access. The default setting is "No".
Display Language Selects display language on the phone.

Grandstream Networks GXP1400 Specifications

General

Brand	Grandstream Networks
Model	GXP1400
Category	IP Phone
Language	English