Grandstream Networks GXP2140 Administration Guide

P a g e | 41
GXP21XX Administration Guide
"Disabled".
Broadsoft Call Park
When enabled, it will send SUBSCRIBE to Broadsoft server to obtain Call
Park notifications. The default setting is “Disabled”.
Account x  SIP Settings  Session Timer
Enable Session Timer
This option is used to enable or disable session timer on the phone side
when server side can provide both session timer UPDATE or session audit
UPDATE. The default setting is “Yes”.
Session Expiration
The SIP Session Timer extension (in seconds) that enables SIP sessions to
be periodically "refreshed" via a SIP request (UPDATE, or re-INVITE). If
there is no refresh via an UPDATE or re-INVITE message, the session will
be terminated once the session interval expires. Session Expiration is the
time (in seconds) where the session is considered timed out, provided no
successful session refresh transaction occurs beforehand. The default
setting is 180. The valid range is from 90 to 64800.
Min-SE
The minimum session expiration (in seconds). The default value is 90
seconds. The valid range is from 90 to 64800.
Caller Request Timer
If set to "Yes" and the remote party supports session timers, the phone will
use a session timer when it makes outbound calls. The default setting is "No".
Callee Request Timer
If set to "Yes" and the remote party supports session timers, the phone will
use a session timer when it receives inbound calls. The default setting is
"No".
Force Timer
If Force Timer is set to "Yes", the phone will use the session timer even if the
remote party does not support this feature. If Force Timer is set to "No", the
phone will enable the session timer only when the remote party supports this
feature. To turn off the session timer, select "No". The default setting is "No".
UAC Specify Refresher
As a Caller, select UAC to use the phone as the refresher; or select UAS to
use the Callee or proxy server as the refresher. The default setting is "Omit".
UAS Specify Refresher
As a Callee, select UAC to use caller or proxy server as the refresher; or
select UAS to use the phone as the refresher. The default setting is "UAC".
Force INVITE
The Session Timer can be refreshed using the INVITE method or the
UPDATE method. Select "Yes" to use the INVITE method to refresh the
session timer. The default setting is "No".
Account x  SIP Settings  Security Settings
Check Domain
Certificates
Choose whether the domain certificates will be checked or not when
TLS/TCP is used for SIP Transport. The default setting is "No".
Validate Certificate
Chain
Validate certification chain when TCP/TLS is configured. Default setting is
“No”.
Validate Incoming
Messages
Choose whether the incoming messages will be validated or not. The default
setting is "No".
Check SIP User ID for
If set to "Yes", SIP User ID will be checked in the Request URI of the

Grandstream Networks GXP2140 Specifications

General

Brand	Grandstream Networks
Model	GXP2140
Category	IP Phone
Language	English