base in the Description field. It could be the same or different from the
Base in LDAP configuration under Advanced Settings. The Base in
LDAP configuration will be used if the Description field is left blank. Enter
the LDAP Name/Number filter in the Value field.
For example:
If users set MPK 1 as “LDAP Search” for “Account 1”, and set filters:
Description -> ou=video,ou=SZ,dc=grandstream,dc=com
Value -> sn=Li
Since the Base for LDAP server configuration is
“dc=62randstream,dc=com”, “ou=video,ou=SZ” is added to narrow the
LDAP search scope. “sn=Li” is the example to filter the last name.
Conference
Allow user to set their Multi-Purpose Key to “Conference” mode to trigger
a conference. By setting the extension number in the value box, the
users will be able to activate a 3-way conference by simply press the
assigned MPK button.
Multicast Paging
This option is for multicast sending. Enter Line key description in
Description field and multicast sending address in Value field.
Record
This option is for Recording calls. Enter Line key description in
Description filed and the recorded extension number in Value field.
Please make sure whether your VOIP provider supports this feature
before using it.
Call Log
Select Account and enter account number in the Value field to allow
configuration of call log for other extension.
Menu
Select this feature in order to display the Menu from the MPK buttons,
no field dis required for configuration.
XML Application
Select this feature in order to start the XML Application from the MPK
buttons, no field dis required for configuration.
Information
Select this feature in order to display the Information popup to show the
firmware version, MAC address, IP address and IP Settings from the
MPK buttons, no field dis required for configuration.
Message
Select this feature in order to display the Message menu from the MPK
buttons, no field dis required for configuration