System Settings/Security Settings
Web/SSH
Access
Enable SSH
Allows SSH access to the phone.
The default setting is “Yes”.
SSH Port
Customizes SSH port to access to the phone.
Default is “22”.
Access Method
Determines which protocol will be used to access the phone ‘s Web GUI. It can be selected from HTTP
and HTTPS.
The default setting is HTTP.
Port
Specifies which port to use to access the phone ‘s Web UI. By default, if HTTP, the port number will be
80; if HTTPS is selected, the port number will be 443.
Web Access
Control
Configures Web access control by using Whitelist or Blacklist on incoming IP addresses.
Default setting is None.
Depending on the configuration set under Web Access Control Option, This setting only allow the list of
IP addresses as Whitelist, or restrict the list of IP addresses as Blacklist to access Web.
Select the user certificate as the web server certificate to encrypt web access.
To Next Page
Loading...
