Figure 76: Attended Transfer
3.
Enter the transfer target number, and then press the “Send” soft key on the right.
4.
Before transfer target answers the call, GXV34x0 hears the ringback tone, and the touch screen prompts shown as below.
Users could tap on “End” to cancel the transfer,or tap on “Transfer now” to complete call transfer (Blindly).
Figure 77: Attended Transfer – Transferring
5.
After transfer target answers the call, the following screen will be shown up. If the user taps on Red button, the call wil be
not be transferred and the original call will be resumed. If the user taps on “Split” soft key to separate the calls, the user will
talk to the second established call while the first call is on hold.If the user presses on “Transfer now” the call will be then
transferred to the transfer destination.
To Next Page
Loading...
Need help?
General
