The incoming call to a SIP account can be forwarded to another account using different rules.
Call Forward: Call forwarding feature is disabled. This is the default setting. Tab to activate.
Call Forward Type:
Unconditional: Forward all calls to a number.
Time based: Set the time range and number to be forwarded the calls to. In this time range, calls are forwarded to the
number specified in “In Time Forward To“; out of this time range, calls are forwarded to the number specified in “Out
Time Forward To“.
Others: Configure Call forward when the phone is Busy or on DND or based on No Answer Out.
Auto
Answer
IF Enabled and set to “Always“, the phone will automatically turn on the speaker phone to answer all incoming calls.
If enabled and set to “Enable Intercom/Paging“, the phone will answer the call based on the SIP info header sent from the
server/proxy.
By default, it’s turned off.
Call
Block
Blacklist: This menu allows configuring a black list of number that will be blocked from calling the phone, users can either
enter the numbers to block manually, from contacts or from call history.
Block Anonymous Calls: when enabled the phone rejects all the anonymous calls, users can choose on which account this
setting is to be applied
Account
Ringtones
Select a ringtone for the incoming call to the SIP account chosen. The system ringtone is set by default.
Shared
Call
Appearance
(SCA)
Shared Call Appearance (SCA): Enable or disable SCA on the account.
Enable Barge-in: If set to “Yes”, the user could barge into an active call on a shared line.
Auto Fill Call Park Code: If set to “Yes”, the configured “Call Park Service Code” will be automatically filled in on the phone’s
dial pad when picking up the parked call. This is used when “Special Mode” is set to “BroadSoft” (from web UI or provisioning)
and “Enable SCA” is set to “Yes”.
Call Park Service Code: Configure the retrieving feature code for call parking. If “Auto Fill Call Park Code” is set to “Yes”, this
call park service code will be automatically filled in on the phone’s dial pad when picking up the parked call. This is used when
“Special Mode” is set to “BroadSoft” (from web UI or provisioning) and “Enable SCA” is set to “Yes”.
Line-size Timeout (s): Configure the time for the line can be seized (in seconds) when using shared line. The default setting is
15 seconds. For Shared Call Appearance, phone will send a SUBSCRIBE-request for the line-seize event package whenever a
user attempts to take the shared line off hook. “Line Seize Timeout” is the line-seize event expiration timer.
Bluetooth
Bluetooth: Tap on “Bluetooth” to turn on/off Bluetooth connection. By default, it’s turned off.
Enable Handsfree Mode: Tap on “Enable handsfree mode” to activate it.