System
Settings/TR-069
Enable TR-069
Sets the phone system to enable the “CPE WAN Management Protocol” (TR-069).
The default setting is “Yes”.
ACS URL
Specifies URL of TR-069 ACS (e.g., http://acs.mycompany.com), or IP address.
Default setting is “https://acs.gdms.cloud”
Enters user name to authenticate to ACS.
ACS Password Enters password to authenticate to ACS.
Periodic Inform Enable
Sends periodic inform packets to ACS.
Default is “Yes”.
Periodic Inform Interval (s)
Configures to sends periodic “Inform” packets to ACS based on specified interval.
Default setting is 86400.
Connection Request User Name
Enters user name for the ACS to connect to the phone.
Connection Request Password Enters password for the ACS to connect to the phone.
Enters the port for the ACS to connect to the phone.
CPE Cert File Uploads Cert File for the phone to connect to the ACS via SSL.
Uploads Cert Key for the phone to connect to the ACS via SSL.
Table 40: System Settings/TR-069
Maintenance Page Definitions
Maintenance/Upgrade
Maintenance/Upgrade/Firmware
Upgrade via Manually Upload
Complete Upgrade
If enabled, all files will be replaced except user data.
Default is disabled.
Upload Firmware File To
Update
Allows users to load the local firmware to the phone to update the firmware.
Upgrade via Network
Firmware Upgrade Mode
Allows users to choose the firmware upgrade method: TFTP, HTTP, HTTPS or Manual
Upload.
The default setting is “HTTP”.
Firmware Server Path
Sets IP address or domain name of firmware server. The URL of the server that hosts the
firmware release.
Default is “fm.grandstream.com/gs”.
HTTP/HTTPS Username Enters the user name for the firmware HTTP/HTTPS server.
HTTP/HTTPS Password Enters the password for the firmware HTTP/HTTPS server.
Firmware File Prefix
Checks if firmware file is with matching prefix before downloading it. This field enables user
to store different versions of firmware files in one directory on the firmware server.
To Next Page
Loading...
Need help?
General
