Record
Click to start capturing audio data, click the “Stop” button to end. To capture the audio data of the device can
help to locate audio issues.
The default is not enabled. You can record up to 1-minute audio data.
List
Choose the existing audio file. Click the “Delete” button on the right to delete this file.
View
Recording
Click on the “List” button to view. The captured audio data will be sorted by time. Click to download the data
to the computer for analysis.
Note: The audio data file will be saved under FileManager
Internal Storage
Recfiles folder. Users can also
delete files under this folder.
Target
Host
The IP address or URL for the Target Host of the Traceroute.
Press Start to send traceroute request to configured target host. Press Stop to end traceroute running
process.
Ping
Target
Host
The IP address or URL for the Target Host of the ping.
Press Start to send ping request to configured target host. Press Stop to end ping running process.
Hostname
Enter a host name and find out the corresponding IP address.
It will also do reverse name lookup and find the host name for an IP address you specify.
Table 43: Maintenance/System Diagnosis
Maintenance/Event
Notification
Set the URL for events on phone web GUI, and when the corresponding event occurs on the phone, the phone will send the
configured URL to SIP server. The dynamic variables in the URL will be replaced by the actual values of the phone before
sending to SIP server, in order to achieve the purpose of events notification. Here are the standards:
1.
The IP address of the SIP server needs to be added at the beginning and separate the dynamic variables with a “/”.
2.
The dynamic variables need to have a “$” at the beginning. For example: local=$local
3.
If users need to add multiple dynamic variables in the same event, users could use “&” to connect with different dynamic
variables. For example: 192.168.40.207/mac=$mac&local=$local
4.
When the corresponding event occurs on the phone, the phone will send the MAC address and phone number to server
address 192.168.40.207.
Configures the event URL when phone boots up.
Incoming Call Configures the event URL when phone has an incoming call.
Configures the event URL when phone has an outgoing call.
Configures the event URL when the phone is off-hook.
Onhook Configures the event URL when the phone is on-hook.
Configures the event URL when the phone has new a missed call.
Connected Configures the event URL when a call is established.
Configures the event URL when a call is disconnected.
DND On Configures the event URL when DND is enabled.
Configures the event URL when DND is disabled.
Forward On Configures the event URL when the forward feature is enabled on the phone.
Configures the event URL when the forward feature is disabled on the phone.
Configures the event URL when users transfer a call with blind transfer on the phone.
Attended Transfer Configures the event URL when users transfer a call with attended transfer on the phone.
To Next Page
Loading...
Need help?
General
