Grandstream Networks GXV3480 Manual

Activate
Paging
Priority
Determines if a new paging call whose priority is higher than the existing paging call will be answered. If it is
checked, this feature will be enabled.
The default setting is disabled.
Multicast
Paging
Codec
Selects the codec type for the multicast paging call. This list includes PCMU, PCMA, G726-32, G722, and
G729A/B, iLBC, Opus.
Enable
Multicast
Paging
Video
Enables the video feature to establish a multicast paging call.
The default setting is disabled.
Multicast
Paging
Video
Codec
Sets the video codec for the multicast paging call.
The default setting is “H.264”.
Multicast
Paging
Image Size
Sets the video image size for the multicast paging call. This list includes 1080P, 720P, 4CIF, VGA, CIF, QVGA,
and QCIF.
Default setting is “VGA”.
Multicast
Paging
Video Bit
Rate
Determines the video bit rate for the multicast paging call.
The default setting is “256 kbps”.
Multicast
Paging
Video
Frame
Rate
Configures the video frame rate for the multicast paging call. This list includes “15 frames/second”, “25
frames/second”, “30 frames/second”, and “Variable frames rate”.
Multicast
Paging
H.264
Profile
Type
Specifies the H.264 codec profile type for the multicast paging call. This list includes “Baseline Profile”, “Main
Profile”, and “High Profile”.
Note: Lower profile is easier to decode, while higher profile has higher compress rate. Usually, use Baseline profile
for low CPU Performance device, and choose high profile for video conference.
Multicast
Paging
H.264
Payload
Type
Determines the H.264 codec payload type for the multicast paging call.
The default setting is “99”.
Multicast
Listening
Prior
ity
Liste
ning
Addr
ess
Label
Configures the IP address and port number for monitoring multicast paging call. When the initiator initiates a
call, answer the call and display listening address and tag of the monitoring target. This feature supports Video
Multicast, when the initiator initiates Video Multicast, it will automatically add the number 2 on the port of the
listening address. Reboot the phone to make changes take effect.
The valid IP address range is from 224.0.0.0 to 239.255.255.255. Users may also fill the label for each listening
address corresponding to priority.
Table 30: Phone Settings/Multicast Paging
Network Settings Page Definitions
Network Settings/Ethernet Settings

Grandstream Networks GXV3480 Specifications

General

Brand	Grandstream Networks
Model	GXV3480
Category	Conference System
Language	English