This page allows to initiate upgrade process by checking if a new firmware is available in the configured firmware server path,
and then upgrading if available. Users can press Settings to configure Firmware/Provisioning settings directly from the
phone’s LCD. Following settings can be configured from this screen:
Firmware upgrade and configuration file detection. This will send a request to firmware and provisioning server to
upgrade/provision the phone if the files are available on the servers.
o Firmware:
Upgrade Mode: This field allows the user to choose the firmware upgrade method: TFTP, HTTP or HTTPS.
HTTP/HTTPS username: The user name for the HTTP/HTTPS server if set up on the server.
HTTP/HTTPS password: The password for the HTTP/HTTPS server if set up on the server.
Firmware Server Path: This defines the server path for the firmware server. It can be different from the configuration
server for provisioning.
o Config:
Upgrade mode: This field allows the user to choose the provisioning method: TFTP, HTTP or HTTPS.
HTTP/HTTPS username: The user name for the HTTP/HTTPS server if set up on the server.
HTTP/HTTPS password: The password for the HTTP/HTTPS server if set up on the server.
Config Server Path: This defines the server path for the provisioning server. It can be different from the firmware
server.
Syslog
Syslog level: Select the level of logging for syslog. The default setting is “None”. There are 4 levels: DEBUG, INFO,
WARNING and ERROR.
System log protocol: Select the protocol of syslog (UDP or SSL/TLS).
Syslog server address: The URL/IP address for the syslog server. If the GXV34x0 has network connection, the phone will
send the syslog packets to this server address.
System log keyword filter: Only send the syslog with keyword, multiple keywords are separated by comma. Example: set
the filter keyword to “SIP” to filter SIP log.
System Security
Disable Web Login: This disables web GUI access.
Developer Mode. To enable/disable developer mode.
Revoke debugging authorizations. To Revoke access to debugging from all computers previously authorized.
Factory Reset. Restore default settings.
GXV34x0 WEB GUI SETTINGS
The GXV34x0 embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow users to
configure the application phone through a Web browser such as Microsoft’s IE, Mozilla Firefox, Google Chrome and etc.
Status Page Definitions
Status/Account Status
Account 16 SIP accounts on the phone.
SIP User ID for the account.
SIP Server
URL or IP address, and port of the SIP server.
Note: this parameter also supports domain string such as “grandstream”.
To Next Page
Loading...
Need help?
General
