Configuration
via Keypad
Menu
Configures access control for keypad Menu settings on the Settings interface of the phone.
Unrestricted: configure all settings on the Settings interface;
Basic Settings Only: The Advanced Settings option will not be displayed;
Basic Settings & Network Settings: Only the Advanced Settings option will not be displayed
Constraint Mode: users need to input admin user password to configure Wireless & Network and
Advanced Settings.
Note: When access control for keypad is limited to “Basic Settings Only” or “Constraint Mode”, the Admin
authentication will be mandatory to start Factory Reset process.
Permission to
Install/Uninstall
Apps
Configures the permissions for users to install/uninstall the applications.
If set to “Allow“, the user is free to install/uninstall third-party apps.
If set to “Require admin password“, the user need to input the correct administrator password to
install/uninstall third-party apps.
If set to “Require admin password if the app source is unknown“, the user need to input admin
password only when install apps from unknown source, administrator password authentication is
required when the user uninstall third-party apps.
If set to “Not allow“, the user cannot install/uninstall third-party apps.
Default is “Allow”.
User Info
Management
Current Admin
Password
Enter current logged-in user’s password. This field is case sensitive.
The default password is “admin”.
Password
Allows the user to change the admin password. The password field is purposely blank after clicking the
“Save” button for security purpose. This field is case sensitive with a maximum length of 32 characters.
Password
Enter the new Admin password again to confirm.
New User
Password
Allows the administrator to set the password for user-level web GUI access. This field is case sensitive
with a maximum length of 32 characters.
The default password is “123”.
User Password
Enter the new User password again to confirm.
Settings
TLS
Version
Configures the minimum TLS version supported by the phone.
Version
Configures the maximum TLS version supported by the phone.
TLS Cipher
Suite
Defines the function for weak TLS cipher suites. If set to “Enable Weak TLS Cipher Suites”, allow users to
encrypt data by weak TLS cipher suites. If set to “Disable Symmetric Encryption RC4/DES/3DES”, allow
users to disable weak cipher DES/3DES and RC4.
Management
Certificate