Search Timeout
(s)
Configures the interval (in seconds) for the server to process the request and client waits for server to
return.
The default setting is 4 seconds.
LDAP Lookup For
Dial
Sets the phone system to do the LDAP number searching when making outgoing calls.
The default setting is “No”.
Incoming Call
Sets the phone system to do LDAP number searching for incoming calls. The default setting is “No”.
LDAP Dialing
Default Account
Configures the default account that being used when dialing LDAP contact. Users may choose the
Account 1-6,
the default setting is “Default”.
Table 49: Applications/LDAP Phonebook
Applications/Recording
File name
Displays the name of the recording file
Displays the duration of the phone call
Date Displays the date the call was recorded on
Delete, Modify or download the recording file
Normal Recording
Displays the name of the recording file
Duration Displays the duration of the phone call
Displays the date the call was recorded on
Delete, Modify or download the recording file
Table 50: Applications/Recording
Value-added Service Page Definitions
Value-added Service/Value-added Service
Value-added
Service (0/10)
Service Type
Users can set the service type to “Door System” to configure the door system options, or to “DTMF” to set
DTMF content to send it during calls.
Door System
Type
Set the door system type to “GDS” if the GDS door system is used, or set it to “Baudisch” if another door
system brand is used.
Note: Each GDS door system has 2 different access passwords to control 2 doors separately named as
[Related Display Name1] & [Related Display Name2] below for door 1 and 2 respectively.