Grandstream Networks HT503 User Manual

P a g e | 46
HT503 User Manual
Boot up”, “Check New Firmware only when F/W pre/suffix changes”, and
“Always Skip the Firmware Check”.
Authenticate Conf File
This protects the configuration from an unauthorized change. If set to “Yes,
the configuration file is authenticated before acceptance.
Firmware Key
Key for firmware encryption. (32 digits in hexadecimal format. End users
should keep it blank.
SIP TLS Certificate
The user specify SSL certificate used for SIP over TLS in X.509 format.
SIP TLS Private Key
The user specify SSL private key used for SIP over TLS in X.509 format.
SIP TLS Private Key
Password
User specify password to protect the private key above.
ACS URL
User specify the Auto Configuration Server’s URL (TR-069 protocol)
ACS Username
User specify the ACS Username
ACS Password
User specify the ACS password
Periodic Inform
Enable
Default is No. If set to YES, device will send inform packets to the ACS
Periodic Inform
Interval
Frequency that the inform packets will be sent out to the ACS
Connection Request
Username
Set a user name for the ACS to connect to this device
Connection Request
Password
Set a password for the ACS to connect to this device
Connection Request
Port
Set a port number for the ACS to connect to this device, default is 7547
CPE SSL Certificate
Configure the SSL authentication of Customer-premises equipment
CPE SSL Private Key
Configure the SSL Private Key of Customer-premises equipment

Grandstream Networks HT503 Specifications

General

Brand	Grandstream Networks
Model	HT503
Category	Telephone Accessories
Language	English