Grandstream Networks HT503 User Manual

P a g e | 20
HT503 User Manual
BASIC OPERATIONS
Understanding HT503 Voice Prompt
HT503 has a built-in voice prompt menu for simple device configuration. The voice prompt menu is designed
for the FXS port only. To enter the voice prompt menu, press *** from the analog phone connected to the
FXS port.
Table 6: HT503 IVR Menu definitions
Menu
Voice Prompt
Options
Main Menu
“Enter a Menu Option”
Press “*” for the next menu option
Press “#” to return to the main menu
Enter 01-05, 07,10,12-17,47 or 99 menu options
01
“DHCP Mode”,
“Static IP Mode”
Press “9” to toggle the selection
If using “Static IP Mode”, configure the IP address information
using menus 02 to 05.
If using “Dynamic IP Mode”, all IP address information comes
from the DHCP server automatically after reboot.
02
“IP Address “ + IP address
The current WAN IP address is announced
If using “Static IP Mode”, enter 12 digit new IP address. You
need to reset the HT to take affect the new IP address.
03
“Subnet “ + IP address
Same as menu 02
04
“Gateway “ + IP address
Same as menu 02
05
“DNS Server “ + IP address
Same as menu 02
07
Preferred Vocoder
Press “9” to move to the next selection in the list:
 PCM U / PCM A

Grandstream Networks HT503 Specifications

General

Brand	Grandstream Networks
Model	HT503
Category	Telephone Accessories
Language	English