Grandstream Networks HT802 User Guide

P a g e | 19
HT802 User Guide
Figure 7: Web HTTP Port
NAT Settings
If you plan to keep the Handy Tone within a private network behind a firewall, we recommend using STUN
Server. The following three settings are useful in the STUN Server scenario:
1. STUN Server (under advanced settings webpage) Enter a STUN server IP (or FQDN) that you may
have, or look up a free public STUN Server on the internet and enter it on this field. If using Public IP,
keep this field blank.
2. Use Random SIP/RTP Ports (under advanced settings webpage) This setting depends on your
network settings. Generally, if you have multiple IP devices under the same network, it should be set
to Yes. If using a public IP address, set this parameter to No.
3. NAT traversal (under the FXS web page) Set this to Yes when gateway is behind firewall on a private
network.
DTMF Methods
The HT802 support the following DTMF mode:
 DTMF in-audio
 DTMF via RTP (RFC2833)
 DTMF via SIP INFO
Set priority of DTMF methods according to your preference. This setting should be based on your server
DTMF setting.
Preferred Vocoder (Codec)
The HT802 supports following voice codecs. On FXS ports pages, choose the order of your favorite codecs:
 PCMU/A (or G711µ/a)
 G729 A/B
 G723.1
 G726 (16/24/32/40)
 iLBC
 OPUS
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46

Grandstream Networks HT802 Specifications

General

Brand	Grandstream Networks
Model	HT802
Category	Adapter
Language	English