Grandstream Networks HT802 User Guide

P a g e | 23
HT802 User Guide
CALL FEATURES
The HT802 supports all the traditional and advanced telephony features.
Table 5: HT802 Call Features
Key
Call features
*02
Forcing a Codec (per call) *027110 (PCMU), *027111 (PCMA), *02723 (G723), *02729
(G729), *0272616 (G726-r16), *0272624 (G726-r24), *0272632 (G726-r32), *0272640
(G726-r40), *027201 (iLBC), *027202 (OPUS).
*03
Disable LEC (per call) Dial “*03” +” number”. No dial tone is played in the middle.
*16
Enable SRTP .
*17
Disable SRTP.
*30
Block Caller ID (for all subsequent calls).
*31
Send Caller ID (for all subsequent calls).
*47
Direct IP Calling. Dial “*47” + “IP address”. No dial tone is played in the middle.
*50
Disable Call Waiting (for all subsequent calls).
*51
Enable Call Waiting (for all subsequent calls).
*67
Block Caller ID (per call). Dial “*67” +” number”. No dial tone is played in the middle.
*82
Send Caller ID (per call). Dial “*67” +” number”. No dial tone is played in the middle.
*69
Call Return Service: Dial *69 and the phone will dial the last incoming phone number
received.
*70
Disable Call Waiting (per call). Dial “*70” +” number”. No dial tone is played in the middle.
*71
Enable Call Waiting (per call). Dial “*71” +” number”. No dial tone is played in the middle.
*72
Unconditional Call Forward: Dial “*72” and then the forwarding number followed by “#”. Wait
for dial tone and hang up. (Dial tone indicates successful forward)
*73
Cancel Unconditional Call Forward. To cancel “Unconditional Call Forward”, dial “*73”, wait
for dial tone, then hang up.
*74
Enable Paging Call: Dial “*74” and then the destination phone number you want to page.
*78
Enable Do Not Disturb (DND): When enabled all incoming calls are rejected.
*79
Disable Do Not Disturb (DND): When disabled, incoming calls are accepted.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46

Grandstream Networks HT802 Specifications

General

Brand	Grandstream Networks
Model	HT802
Category	Adapter
Language	English