Grandstream Networks HT814 Administration Guide

P a g e | 35
HT812/HT814 Administration Guide
Use SIP User Agent
Header
Configures the SIP User-Agent Header.
Distinctive Ring
Tone
Customizes the Ring Tone 1 to 3 with associate caller ID: when selected, if caller ID is
configured, then the device will ONLY use this ring tone when the incoming call is from
the Caller ID. System Ring Tone is used for all other calls. When selected but no Caller
ID is configured, the selected ring tone will be used for all incoming calls using the FXS
port. Distinctive ring tones can be configured not only for matching a whole number, but
also for matching prefixes. In this case symbol * (star) will be used.
For example: if configured as *617, Ring Tone 1 will be used in case of call arrived from
the area code 617. Any other incoming call will ring using cadence defined in parameter
System Ring Cadence located under Advanced Settings Configuration page.
Note: If server supports Alert-Info header and standard ring tone set (Bellcore) or
distinctive ring tone 1-10 is specified, then the ring tone in the Alert-Info header from
server will be used. Bellcore rings and tones are independent from custom ring tones.
The custom ring tones can also be specified by alert-info header, for example Alert-
Info: ;info=ring5
Disable Call
Waiting
Disables receiving a second incoming call when the line is engaged. Default is No.
Disable Call
Waiting Caller ID
Disables displaying caller ID when receiving a second incoming call. Default is No.
Disable Call
Waiting Tone
Disables playing call waiting tone during active call when receiving a second incoming
call. The CWCID will still be displayed. Default is No.
Disable Connected
Line ID
Disables displaying the number of the person answering the phone. Default is No.
Disable Receiver
Off hook Tone
Enables / disables the warning to alert that the phone has been left off-hook for an
extended period of time.
Default is No.
Disable Reminder
Ring for On-Hold
Call
Enables playing the reminder ring. Default is No
Disable Visual MWI
Disables use of visual message waiting indicator when there is an unread voicemail
message. Default is No.
Do Not Escape '#'
as %23 in SIP URI
Replaces # by %23 in some special situations. Default is No.

Grandstream Networks HT814 Specifications

General

Brand	Grandstream Networks
Model	HT814
Category	Telephone Accessories
Language	English