Grandstream Networks UCM6102

3
TABLE OF FIGURES
Figure 1: Typical UCM Scenario ................................................................................................................... 4
Figure 2: Quick Installation Guide for UCM6102 .......................................................................................... 5
Figure 3: Quick Installation Guide – Login Screen ....................................................................................... 5
Figure 4: Create User Extension – Extension Range ................................................................................... 6
Figure 5: Create User Extension – Extensions ............................................................................................. 7
Figure 6: Create User Extension – Create New User ................................................................................... 7
Figure 7: Create User Extension – Created Single User .............................................................................. 8
Figure 8: Create User Extension – Batch Add User ..................................................................................... 8
Figure 9: Create User Extension – Create User Prompt .............................................................................. 8
Figure 10: Create User Extension – Single and Batch Add Extensions Created ......................................... 9
Figure 11: Provisioning with Zero Config – Auto Discovery ........................................................................ 10
Figure 12: Provisioning with Zero Config – Extension Assignment ............................................................ 11
Figure 13: Provisioning with Zero Config – Manually Assigned Extension ................................................. 11
Figure 14: Provisioning with Zero Config – Extension Status ..................................................................... 11
Figure 15: Conference Bridge – Create New Conference Room ............................................................... 12
Figure 16: Conference Bridge – Create New Conference Room ............................................................... 13
Figure 17: Conference Bridge – Conference In Progress ........................................................................... 13
Figure 18: IVR – Manage IVR ..................................................................................................................... 14
Figure 19: IVR – Create New IVR ............................................................................................................... 15
Figure 20: IVR – Key Pressing Events ........................................................................................................ 15
Figure 21: Analog Trunks – Create New Analog Trunk ............................................................................... 16
Figure 22: VoIP Trunks – Create New Register SIP Trunk ......................................................................... 18
Figure 23: VoIP Trunks – Edit VoIP Trunk ................................................................................................... 18
Figure 24: Status – Trunks .......................................................................................................................... 18
Figure 25: Routes – Create Outbound Route ............................................................................................. 20
Figure 26: Routes – Create Inbound Route ................................................................................................ 21