Grandstream Networks UCM6102

8
Figure 7: Create User Extension – Created Single User
S
TEPS ON ADDING BATCH OF USERS
1. Navigate to PBX Basic/Call Routes  Extensions
2. Click on “Batch Add Extensions”
3. At the “Batch Add Extensions” dialog, the user can specify the “Starting Extension” and the number
of extensions to generate by setting the “Create Number”. In this tutorial we will have a starting
extension of 101 and have the UCM6100 series generate 5 extensions with a password randomly
generated. This would create extensions 101, 102, 103, 104 and 105.
Figure 8: Create User Extension – Batch Add User
4. Click “Create Users” at the bottom to have the UCM6100 series generate the extensions
5. Next, a prompt will appear asking “Are you sure you want to create users: 101, 102, 103, 104 105”.
Click “OK”.
Figure 9: Create User Extension – Create User Prompt