Need help?Do you have a question about the Grandstream Networks UCM6108 and is the answer not in the manual?
General| Model | UCM6108 |
|---|---|
| Type | IP PBX |
| FXO Ports | 8 |
| Concurrent Calls | 500 |
| Maximum SIP Registrations | Up to 500 |
| SIP Accounts | Up to 500 |
| Operating Temperature | 0°C to 40°C |
| VoIP Protocols | SIP |
| Power Supply | AC 100-240V, 50/60Hz |
| Interfaces | 8 FXO ports, 1 USB port |
| Voice Codecs | G.711, G.726, G.729, iLBC |
| Fax over IP | T.38, G.711 pass-through |
| Networking Protocols | TCP/IP, UDP, ICMP, ARP, RARP, HTTP, HTTPS, DHCP, NTP, TFTP, DNS, DDNS, PPPoE, SSH, Telnet |
| QoS | Layer 3 QoS |
| Processor | ARM Cortex A8 |
| Memory | 512 MB |
| Flash Memory | 4GB |
| Operating Humidity | 10% to 90% (non-condensing) |
Highlights key features of the UCM6100 series IP PBX appliance.
Details the technical specifications of the UCM6100 series IP PBX appliance.
Guides on how to connect the UCM6100 series IP PBX appliance.
Guides users on accessing and utilizing the UCM6100's Web GUI.
Covers configuration of network parameters for the UCM6100.
Details static defense configurations within the UCM6100 firewall.
Details the methods for automatically provisioning devices via Zero Config.
Guides on creating new user extensions with their configuration parameters.
Details configuration and setup for analog trunk connections.
Guides on configuring and managing VoIP trunk connections.
Configuration of rules for outbound call routing based on dial patterns.
Configuration of rules for handling incoming calls based on DID and time.
Details global settings for voicemail features on the UCM6100.
Provides a list of feature codes and their usage for various call functions.
Details general SIP settings like realm, ports, and guest call handling.
Configures TCP and TLS connections for SIP, including certificate management.
Configures NAT settings for UCM6100 behind network address translation.
Displays real-time status of Trunks, Extensions, Queues, Conference Rooms, and Interfaces.
Allows viewing the status of configured trunk connections on the UCM6100.
Displays the status of all configured extensions, including type and message status.
Shows the status of configured call queues, including agents and call counts.
Displays the status of configured conference rooms, including participants and call duration.
Shows the connection status of USB, LAN, FXS, and FXO interfaces.
Displays the status of parked calls, including caller ID, channel, and timeout.
Details methods for upgrading UCM6100 firmware via network or local upload.
Details how to create and manage local backups of UCM6100 configurations.
Configures automated daily backups to a remote server via SFTP.
Guides on restoring UCM6100 configurations from local or uploaded backup files.
Captures network traces for analysis to troubleshoot connectivity issues.
To Next Page
