Grandstream Networks UCM6108 User Manual

Firmware Version 1.0.2.21 UCM6100 Series IP PBX User Manual Page 94 of 159
VOICEMAIL
CONFIGURE VOICEMAIL
If the voicemail is enabled for UCM6100 extensions, the configurations of the voicemail can be globally set
up and managed under Web GUI->PBX->Call Features->Voicemail.
Table 30: Voicemail Settings
Max Greeting
Configure the maximum number of seconds for the voic
email greeting.
The default setting is 60 seconds.
Dial '0' For Operator
If enabled, the caller can press 0 to exit the voicemail application and
connect to the configured operator's extension.
The operator extension
can be configured under web GUI->PBX->Internal Options->General.
Max Messages Per Folder
Configure the maximum number of messages per folder
in users'
voicemail. The valid range 10 to 1000. The default setting is 50.
Max Message Time
Select the maximum duration of the voicemail message. The message
will not be recorded if the duration exceeds the max message time. The
default setting is 15 minutes. The available options are:
x 1 minute
x 2 minutes
x 5 minutes
x 15 minutes
x 30 minutes
x Unlimited
Min Message Time
Configure the minimum duration (in secon
ds) of a voicemail message.
Messages will be automatically del
eted if the duration is shorter than the
Min Message Time. The default setting is 3 seconds. The available
options are:
x No minimum
x 1 second
x 2 seconds
x 3 seconds
x 4 seconds
x 5 seconds
Note:
Silence and noise duration are not counted in message time.
Announce Message Caller-ID If enabled, the caller ID of the user who has left
the message will be
http://arttel.ru
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102

Grandstream Networks UCM6108 Specifications

General

Brand	Grandstream Networks
Model	UCM6108
Category	PBX
Language	English