Grandstream Networks UCM6108 User Manual

Firmware Version 1.0.2.21 UCM6100 Series IP PBX User Manual Page 43 of 159
Protocol Type Select HTTP or HTTPS. The default setting is "HTTPS".
Port
Specify port number to access the HTTP server.
The default port
number is 8089.
Once the change is saved, the web page will be redirected to the login page using the new URL. Enter the
username and password to login again.
EMAIL SETTINGS
The Email application on the UCM6100 can be used to send out Emails to users with Fax (e.g.,
Fax-To-Email), Voicemail (Voicemail-To-Email) and other information as attachment. The configuration
parameters can be accessed via Web GUI->Settings->Email Settings.
Table 17: Email Settings
TLS Enable
Enable or disable TLS during tran
sferring/submitting your Email to other
SMTP server. The default setting is "Yes".
Type
Select Email type.
x
MTA: Mail Transfer Agent. The Email will be sent from the
configured domain.
When MTA is selected, there is no need to set
up SMTP server for it or no user login is required. However, the
Emails sent from MTA might be considered as spam by the target
SMTP server.
x Client: Submit Emails to the SMTP server.
A SMTP server is
required and users need login with correct credentials.
Domain Specify the domain name to be used in the Email.
Display Name Specify the display name in the FROM header in the Email.
Sender
Specify the sender's Email address.
For example, pbx@example.mycompany.com.
The following figure shows a sample Email settings on the UCM6100 assuming the Email is using
smtp.gmail.com as the SMTP server.
http://arttel.ru
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102

Grandstream Networks UCM6108 Specifications

General

Brand	Grandstream Networks
Model	UCM6108
Category	PBX
Language	English