Firmware Version 1.0.2.21 UCM6100 Series IP PBX User Manual Page 14 of 159
PRODUCT OVERVIEW
FEATURE HIGHTLIGHTS
x 1GHz ARM Cortex A8 application processor, large memory (512MB DDR RAM, 4GB NAND Flash),
and dedicated high performance multi-core DSP array for advanced voice processing.
x Integrated 2/4/8/16 PSTN trunk FXO ports, 2 analog telephone FXS ports with lifeline capability in
case of power outage, and up to 50 SIP trunk options.
x Gigabit network port(s) with integrated PoE, USB, SD; integrated NAT router with advanced QoS
support (UCM6102 only).
x Supports a wide range of popular voice codes (including G.711 A-law/U-law, G.722, G.723.1, G.726,
G.729A/B, iLBC, GSM), video codec (including H.264, H.263, H.263+), and Fax (T.38).
x Hardware DSP based 128ms-tail-length carrier-grade line echo cancellation (LEC).
x Supports up to 500 SIP endpoint registration, up to 60 concurrent calls and up to 32 conference
attendees.
x Flexible dial plan, call routing, site peering, call recording.
x Automated detection and provisioning of IP phones, video phones, ATA and other endpoints for easy
deployment.
x Hardware encryption accelerator to ensure strongest security protection using SRTP, TLS, and
HTTPS.
TECHNICAL SPECIFICATIONS
Table 1: Technical Specifications
Interfaces
Analog Telephone FXS Ports 2 ports (both with lifetime capability in case of power outage)
PSTN Line FXO Ports
x UCM6102: 2 ports
x UCM6104: 4 ports
x UCM6108: 8 ports
x UCM6116: 16 ports
Network Interfaces
x UCM6102/6104: Dual 10M/100M/1000M RJ45 E
integrated PoE Plug (IEEE 802.3at-2009)
x UCM6108/6116: Single 10M/100M/1000M RJ45 Ethernet port with
integrated PoE Plug (IEEE 802.3at-2009)
NAT Router Yes, UCM6102 only
Peripheral Ports USB, SD/SDHC (VFAT)
LED Indicators Power/Ready, Network, PSTN Line, USB, SD
http://arttel.ru
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102
To Next Page
Loading...
Need help?
General
