Grandstream Networks UCM6108 User Manual

Firmware Version 1.0.2.21 UCM6100 Series IP PBX User Manual Page 118 of 159
callee.
Call Park
x Default code: #72.
x Enter the code during active call to park the call.
x Options
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature
code on both caller and
callee.
Audio Mix Record
x Default code: *3.
x Enter the code followed by # or SEND to start recording the
audio call and the UCM6100
will mix the streams natively on
the fly as the call is in progress.
x Options
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both
: Enable the feature code on both caller and
callee.
DND/Call Forward
Do Not Disturb (DND) Activate
x Default code: *77.
Do Not Disturb (DND) Deactivate
x Default code: *78.
Call Forward Busy Activate
x Default Code: *90.
x
Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
Call Forward Busy Deactivate
x Default Code: *91.
Call Forward No Answer Activate
x Default Code: *92.
x
Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
Call Forward No Answer
Deactivate
x Default Code: *93.
Call Forward Unconditional
Activate
x Default Code: *72.
x Enter
the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
Call Forward Unconditional
Deactivate
x Default Code: *73.
Feature Misc
Feature Code Digits Timeout
x Default Setting: 1000.
http://arttel.ru
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102

Grandstream Networks UCM6108 Specifications

General

Brand	Grandstream Networks
Model	UCM6108
Category	PBX
Language	English