Firmware Version 1.0.2.21 UCM6100 Series IP PBX User Manual Page 108 of 159
6. Create or edit the extension for FXS port.
x Analog Station: Select FXS port to be assigned to the extension. By default, it's set to "None".
x Once selected, analog related settings for this extension will show up in "Analog Settings"
section.
Figure 51: Configure Extension For Fax Machine
7. Go to web GUI->PBX->Basic/Call Routes->Inbound Routes page.
8. Create an inbound route to use the Fax analog trunk. Select the created extension for Fax machine in
step 4 as the default destination.
Figure 52: Configure Inbound Rule For Fax
http://arttel.ru
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102
To Next Page
Loading...
