Firmware Version 1.0.2.21 UCM6100 Series IP PBX User Manual Page 27 of 159
English
Simplified Chinese
Spanish
French
Portuguese
Russian
Italian
Polish
German
Czech
Users can select the displayed language in web GUI login page, or at the upper right of the web GUI after
logging in.
Figure 10: UCM6100 Web GUI Language
SAVE AND APPLY CHANGES
Click on "Save" button after configuring the web GUI options in one page. After saving all the changes,
make sure click on "Apply Changes" button on the upper right of the web page to submit all the changes. If
the change requires reboot to take effect, a prompted message will pop up for you to reboot the device.
MAKE YOUR FIRST CALL
Power up the UCM6100 and your SIP end point phone. Connect both devices to the network. Then follow
the steps below to make your first call.
1. Log in the UCM6100 web GUI, go to PBX->Basic/Call Routes->Extensions.
http://arttel.ru
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102
To Next Page
Loading...
Need help?
General
