Firmware Version 1.0.2.21 UCM6100 Series IP PBX User Manual Page 57 of 159
Codec Preference
Select audio and video codec for the extension
are: PCMU, PCMA, GSM, AAL2-G.726-32
, G.722, G.729, G.723, ILBC,
ADPCM, LPC10, H.264, H.263 and H.263p.
Pickup Group
Assign the extension to a pickup group.
If the extension belongs to a
pickup group, any incoming calls to this extension can be picked up from
the other extensions in the same pickup group by dialing the call pickup
feature code (by default it's *8). By d
efault the extension belongs to the
first pickup group.
BATCH ADD EXTENSIONS
Under Web GUI->PBX->Basic/Call Routes->Extensions, click on "Batch Add Extensions" to start adding
extensions in batch.
Table 21: Batch Add Extension Parameters
General
Start Extension
Configure the starting extension number
of the batch of extensions to be
added.
Create Number Specify the number of extensions to be added. The default setting is 5.
Permission
Assign permission level to the user. The a
"Internal", "Local", "National" and "International
" from the lowest level to
the highest level. The default setting is "Internal".
Note:
Users need to have the same level as or higher level than an outbound
rule's privilege in order to make outbound calls from this rule.
Enable Voicemail Enable Voicemail for the user. The default setting is "Yes".
SIP/IAX Password
Configure the SIP/IAX password for the users.
available to create password for the batch of extensions.
x User Random Password.
A random secure password will be automatically generated. It is
recommended to use this password for security purpose.
x Use Extension as Password.
x Enter a password to be used on all the extensions in the batch.
Voicemail Password
Configure Voicemail password (digits only) for the users.
x User Random Password.
A random password in digits will be automatically generated. It is
http://arttel.ru
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102
To Next Page
Loading...
Need help?
General
