Grandstream Networks UCM6108 User Manual

Firmware Version 1.0.2.21 UCM6100 Series IP PBX User Manual Page 44 of 159
Figure 18: UCM6100 Email Settings
Click on "Test". In the prompt, fill in a valid Email address to send a test Email to verify the Email settings on
the UCM6100.
TIME SETTINGS
The current system time on the UCM6100 is displayed on the upper right of the web page. It can also be
found under Web GUI->Status->System Status->General.
To configure the UCM6100 to update time automatically, go to Web GUI->Settings->Time
Settings->Time Auto Updating.
Table 18: Time Auto Updating
Remote NTP Server
Specify the URL or IP address of the NTP server for the UCM6100 to
synchronize the date and time
. The default NTP server is
ntp.ipvideotalk.com.
Enable DHCP Option 2
If set to "Yes", the UCM6100 is allowed to get provisioned for Time Zone
from DHCP Option 2 in the local server automatic
ally. The default
setting is "Yes".
Enable DHCP Option 42
If set to "Yes", the UCM6100 is allowed to get provisioned for NTP
Server from DHCP Option 42 in the local server automatically. This will
override the manually configured NTP Server. The
default setting is
"Yes".
http://arttel.ru
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102

Grandstream Networks UCM6108 Specifications

General

Brand	Grandstream Networks
Model	UCM6108
Category	PBX
Language	English