Figure 4: Configure Inbound Rule on UCM6XXX
The default destination is configured to IVR. Ensure to select the proper extension for the IVR.
Configure FXO Port On GXW410X When Peered with UCM6XXX
1. Connect the PSTN line to the GXW410X FXO port.
2. On the GXW410X web GUI, go to the Accounts->Account X-> General Settings page and enter
the IP address of the UCM6XXX that you are peering with.
Figure 5: Configure FXO Port on GXW410X: General Settings
3. Please make sure the SIP Registration option under Accounts-> Account X-> SIP Settings is set
to No. In the following example, UCM6XXX has IP address 192.168.5.250.
To Next Page
Loading...
Need help?
General
