Page 29Section 10: Product Fiche and Section 11: End of Life Information
11 END OF LIFE INFORMATION
10 PRODUCT FICHE
Product che concerning the
THE ECODESIGN FOR ENERGY-RELATED
PRODUCTS AND ENERGY INFORMATION
(AMENDMENT) (EU EXIT) REGULATIONS 2020
Model Description Energy eciency
Standing loss
(W)
Actual volume
(litres)
QRINTSC210 210 litre single coil integrated cylinder C 74 197
GENERAL
Grant hot water storage cylinders and thermal stores incorporate components manufactured from a variety of dierent materials. The
majority of these materials can be recycled whilst the smaller remainder cannot.
Materials that cannot be recycled must be disposed of according to local regulations using appropriate waste collection and/or disposal
services.
DISASSEMBLY
There is little risk to those involved in the disassembly of the cylinder or thermal store if the process is undertaken with care and
reasonable precautions are taken.
RECYCLING
Many of the materials used in Grant hot water storage cylinders and thermal stores can be recycled, as listed below:
COMPONENT MATERIAL
Shell Stainless steel (duplex LDX 2001)
Internal coils Stainless steel
Compression connections Brass
Outer casing Galvanized steel (Estetic Tex organic coating to BS EN 10169)
Top/bottom caps Polypropylene
T&P valve Brass
Immersion heater Brass/stainless steel
Dual thermostat Plastic/copper
DISPOSAL
All materials other than those listed above must be disposed of responsibly as general waste.
Neil Sawers
Technical Manager
To Next Page
Loading...
Need help?
General
