Need help?Do you have a question about the Grant HPiD6 and is the answer not in the manual?
General| Refrigerant | R32 |
|---|---|
| Weight (Outdoor Unit) | 42 kg |
| Category | Air Source Heat Pump |
| Heating Capacity | 6kW |
| Operating Temperature Range (Heating) | -20°C to +35°C |
| Operating Temperature Range (Cooling) | +10°C to +46°C |
| Power Supply | 230V, 50Hz, 1Ph |
| Model | Grant HPiD6 |
Overview of the Grant Aerona³ range, its approvals, and manual purpose.
Details on different models, main components like DC inverter, compressor, heat exchanger, fan, and pump.
Guidance on planning permission, DNO applications, servicing recommendations, and important installation advice.
Information on where to find a sequential list of all control parameters.
Table detailing heating capacity, COP, SCOP, power supply, dimensions, weight, and ErP ratings for different models.
Guidance on selecting and connecting the mains supply cable and breaker capacity for heat pumps.
Diagrams showing the physical dimensions of HPID6, HPID10, and HPID16 outdoor units.
Diagrams illustrating the dimensions of the remote controller, including mounting plate and open/closed states.
Introduction to installation, requirements for system design, and heat emitter sizing guidance.
Compliance with building regulations, heat pump location considerations, noise, and orientation.
Guidance on preparing the base, ensuring correct clearances, and managing vibration.
Details on insulating pipework, connecting the heating system, buffer tank requirements, and RHI metering.
Hydraulic diagrams, flushing procedures, corrosion protection, and anti-freeze settings.
Steps for completing installation, handover, and a comprehensive installation checklist.
To Next Page
