18
17 Service Log
Service 1 Service 2 Service 3 Service 4 Service 5
Heating System
System pressure – check/top up
Pressure relief valve operation - check
Expansion vessel charge pressure – check
Magnetic filter – inspect/clean
Corrosion inhibitor in system – check
Flue System
Flue terminal – check condition
Flue system – check clean
Draught stabilizer – check operation
Smoke test (Smoke test II Part J. Section E15)
Combustion ventilation – check
Boiler
Temperature probe – check
Overheat thermostat – check
Primary heat exchanger – inspect/clean
Secondary heat exchanger – inspect/clean
Wash system – inspect/clean
Combustion chamber – inspect/clean
Fan – inspect/clean
Shaker mechanism - grease
Shaker system – check operation
Condensate trap – inspect/clean
Condensate discharge pipe – inspect/clean
Burner
Brazier – dismantle/clean
Photocell – inspect/clean
Ignition element – inspect/clean
Boiler settings – check
Safety devices
Hopper lid switch – check operation
Combustion door switch – check operation
Pellet Hopper
Check for dust build-up
Auger – check for blockages
Combustion
Combustion chamber draught – check/adjust
Flue gas analysis – check/adjust
Customer handover
Service Date
Service Company
Signature