4.5 Optional EcoExchanger® 4 HACCP Hygiene and Operation
Documentation
4.5 Optional EcoExchanger®
The EcoExchanger is a heat recovery and steam reduction unit all in one.
The unit is condensing the steam and at the same time increasing the
temperature on the incoming water (cold) to the rinse tank.
11 Press STOP button (2), release it and wait 3 seconds.
22 Press “Short program” (4), five times.
33 Use button “Eco program” (3) or button “Normal program (5) until you
see “Steam reduction equipment” in the display. Confirm your choice by
pressing Confirm button (1).
Here you can scroll and choose steam reduction ON or OFF. The setting
will always be in ON mode upon delivery if EcoExchanger has been or-
dered as an factory fitted option with the machine.
For instructions how to clean the EcoExchanger, see chapter 3.2 Cleaning
inside the machine, p 12.
Rev. 2021-12 45
To Next Page
Loading...
